Make certain you have read the Barco iD R600 SXGA+ DLP Projector manual thoroughly before attempting the Barco iD R600 SXGA+ DLP Projector bulb replacement on your Barco iD R600 SXGA+ DLP Projector. Without touching the surface of the Barco iD R600 SXGA+ DLP Projector lens, remove the lens tube and set it aside. Write down the number from inside the tube's inner lip for the purpose of make, model or serial number for any future need to buy Barco iD R600 SXGA+ DLP Projector replacement parts. Your bulb should be sitting just beyond the opening of the Barco iD R600 SXGA+ DLP Projector body. Reach in with two fingers and disconnect the Barco iD R600 SXGA+ DLP Projector bulb. Reverse these steps to re-assemble your Barco iD R600 SXGA+ DLP Projector. This concludes the Barco iD R600 SXGA+ DLP Projector review - be sure to read the entire Barco iD R600 SXGA+ DLP Projector manual.