Make certain you have read the Barco SLM R12+ Performer SXGA+ DLP Projector manual thoroughly before attempting the Barco SLM R12+ Performer SXGA+ DLP Projector bulb replacement on your Barco SLM R12+ Performer SXGA+ DLP Projector. Without touching the surface of the Barco SLM R12+ Performer SXGA+ DLP Projector lens, remove the lens tube and set it aside. Write down the number from inside the tube's inner lip for the purpose of make, model or serial number for any future need to buy Barco SLM R12+ Performer SXGA+ DLP Projector replacement parts. Your bulb should be sitting just beyond the opening of the Barco SLM R12+ Performer SXGA+ DLP Projector body. Reach in with two fingers and disconnect the Barco SLM R12+ Performer SXGA+ DLP Projector bulb. Reverse these steps to re-assemble your Barco SLM R12+ Performer SXGA+ DLP Projector. This concludes the Barco SLM R12+ Performer SXGA+ DLP Projector review - be sure to read the entire Barco SLM R12+ Performer SXGA+ DLP Projector manual.