Make certain you have read the Sanyo PLCXT16 Projector XGA 3500 ANSI Lumens 7.8kg manual thoroughly before attempting the Sanyo PLCXT16 Projector XGA 3500 ANSI Lumens 7.8kg bulb replacement on your Sanyo PLCXT16 Projector XGA 3500 ANSI Lumens 7.8kg. Without touching the surface of the Sanyo PLCXT16 Projector XGA 3500 ANSI Lumens 7.8kg lens, remove the lens tube and set it aside. Write down the number from inside the tube's inner lip for the purpose of make, model or serial number for any future need to buy Sanyo PLCXT16 Projector XGA 3500 ANSI Lumens 7.8kg replacement parts. Your bulb should be sitting just beyond the opening of the Sanyo PLCXT16 Projector XGA 3500 ANSI Lumens 7.8kg body. Reach in with two fingers and disconnect the Sanyo PLCXT16 Projector XGA 3500 ANSI Lumens 7.8kg bulb. Reverse these steps to re-assemble your Sanyo PLCXT16 Projector XGA 3500 ANSI Lumens 7.8kg. This concludes the Sanyo PLCXT16 Projector XGA 3500 ANSI Lumens 7.8kg review - be sure to read the entire Sanyo PLCXT16 Projector XGA 3500 ANSI Lumens 7.8kg manual.