Make certain you have read the Sanyo PLC-XU86 XGA (1024 x 768) LCD Multimedia Projector, 2500 ANSI Lumens, 5.7 lb manual thoroughly before attempting the Sanyo PLC-XU86 XGA (1024 x 768) LCD Multimedia Projector, 2500 ANSI Lumens, 5.7 lb bulb replacement on your Sanyo PLC-XU86 XGA (1024 x 768) LCD Multimedia Projector, 2500 ANSI Lumens, 5.7 lb. Without touching the surface of the Sanyo PLC-XU86 XGA (1024 x 768) LCD Multimedia Projector, 2500 ANSI Lumens, 5.7 lb lens, remove the lens tube and set it aside. Write down the number from inside the tube's inner lip for the purpose of make, model or serial number for any future need to buy Sanyo PLC-XU86 XGA (1024 x 768) LCD Multimedia Projector, 2500 ANSI Lumens, 5.7 lb replacement parts. Your bulb should be sitting just beyond the opening of the Sanyo PLC-XU86 XGA (1024 x 768) LCD Multimedia Projector, 2500 ANSI Lumens, 5.7 lb body. Reach in with two fingers and disconnect the Sanyo PLC-XU86 XGA (1024 x 768) LCD Multimedia Projector, 2500 ANSI Lumens, 5.7 lb bulb. Reverse these steps to re-assemble your Sanyo PLC-XU86 XGA (1024 x 768) LCD Multimedia Projector, 2500 ANSI Lumens, 5.7 lb. This concludes the Sanyo PLC-XU86 XGA (1024 x 768) LCD Multimedia Projector, 2500 ANSI Lumens, 5.7 lb review - be sure to read the entire Sanyo PLC-XU86 XGA (1024 x 768) LCD Multimedia Projector, 2500 ANSI Lumens, 5.7 lb manual.