Make certain you have read the SANYO PLC-XU47 PROJECTOR XGA 2000 ANSI LUMENS 2.7KG WEIGHT manual thoroughly before attempting the SANYO PLC-XU47 PROJECTOR XGA 2000 ANSI LUMENS 2.7KG WEIGHT bulb replacement on your SANYO PLC-XU47 PROJECTOR XGA 2000 ANSI LUMENS 2.7KG WEIGHT. Without touching the surface of the SANYO PLC-XU47 PROJECTOR XGA 2000 ANSI LUMENS 2.7KG WEIGHT lens, remove the lens tube and set it aside. Write down the number from inside the tube's inner lip for the purpose of make, model or serial number for any future need to buy SANYO PLC-XU47 PROJECTOR XGA 2000 ANSI LUMENS 2.7KG WEIGHT replacement parts. Your bulb should be sitting just beyond the opening of the SANYO PLC-XU47 PROJECTOR XGA 2000 ANSI LUMENS 2.7KG WEIGHT body. Reach in with two fingers and disconnect the SANYO PLC-XU47 PROJECTOR XGA 2000 ANSI LUMENS 2.7KG WEIGHT bulb. Reverse these steps to re-assemble your SANYO PLC-XU47 PROJECTOR XGA 2000 ANSI LUMENS 2.7KG WEIGHT. This concludes the SANYO PLC-XU47 PROJECTOR XGA 2000 ANSI LUMENS 2.7KG WEIGHT review - be sure to read the entire SANYO PLC-XU47 PROJECTOR XGA 2000 ANSI LUMENS 2.7KG WEIGHT manual.