Make certain you have read the SANYO PLC-XT11 PROJECTOR, 3000 LUMENS, XGA, 800:1, 7.8KG, 2000LL manual thoroughly before attempting the SANYO PLC-XT11 PROJECTOR, 3000 LUMENS, XGA, 800:1, 7.8KG, 2000LL bulb replacement on your SANYO PLC-XT11 PROJECTOR, 3000 LUMENS, XGA, 800:1, 7.8KG, 2000LL. Without touching the surface of the SANYO PLC-XT11 PROJECTOR, 3000 LUMENS, XGA, 800:1, 7.8KG, 2000LL lens, remove the lens tube and set it aside. Write down the number from inside the tube's inner lip for the purpose of make, model or serial number for any future need to buy SANYO PLC-XT11 PROJECTOR, 3000 LUMENS, XGA, 800:1, 7.8KG, 2000LL replacement parts. Your bulb should be sitting just beyond the opening of the SANYO PLC-XT11 PROJECTOR, 3000 LUMENS, XGA, 800:1, 7.8KG, 2000LL body. Reach in with two fingers and disconnect the SANYO PLC-XT11 PROJECTOR, 3000 LUMENS, XGA, 800:1, 7.8KG, 2000LL bulb. Reverse these steps to re-assemble your SANYO PLC-XT11 PROJECTOR, 3000 LUMENS, XGA, 800:1, 7.8KG, 2000LL. This concludes the SANYO PLC-XT11 PROJECTOR, 3000 LUMENS, XGA, 800:1, 7.8KG, 2000LL review - be sure to read the entire SANYO PLC-XT11 PROJECTOR, 3000 LUMENS, XGA, 800:1, 7.8KG, 2000LL manual.