Make certain you have read the Sanyo PLC-XF45 10,000 ANSI Lumens LCD Projector manual thoroughly before attempting the Sanyo PLC-XF45 10,000 ANSI Lumens LCD Projector bulb replacement on your Sanyo PLC-XF45 10,000 ANSI Lumens LCD Projector. Without touching the surface of the Sanyo PLC-XF45 10,000 ANSI Lumens LCD Projector lens, remove the lens tube and set it aside. Write down the number from inside the tube's inner lip for the purpose of make, model or serial number for any future need to buy Sanyo PLC-XF45 10,000 ANSI Lumens LCD Projector replacement parts. Your bulb should be sitting just beyond the opening of the Sanyo PLC-XF45 10,000 ANSI Lumens LCD Projector body. Reach in with two fingers and disconnect the Sanyo PLC-XF45 10,000 ANSI Lumens LCD Projector bulb. Reverse these steps to re-assemble your Sanyo PLC-XF45 10,000 ANSI Lumens LCD Projector. This concludes the Sanyo PLC-XF45 10,000 ANSI Lumens LCD Projector review - be sure to read the entire Sanyo PLC-XF45 10,000 ANSI Lumens LCD Projector manual.