Make certain you have read the BENQ MP610 6.4 LBS DLP PROJECTOR SVGA 2000 ANSI 2000:1 manual thoroughly before attempting the BENQ MP610 6.4 LBS DLP PROJECTOR SVGA 2000 ANSI 2000:1 bulb replacement on your BENQ MP610 6.4 LBS DLP PROJECTOR SVGA 2000 ANSI 2000:1. Without touching the surface of the BENQ MP610 6.4 LBS DLP PROJECTOR SVGA 2000 ANSI 2000:1 lens, remove the lens tube and set it aside. Write down the number from inside the tube's inner lip for the purpose of make, model or serial number for any future need to buy BENQ MP610 6.4 LBS DLP PROJECTOR SVGA 2000 ANSI 2000:1 replacement parts. Your bulb should be sitting just beyond the opening of the BENQ MP610 6.4 LBS DLP PROJECTOR SVGA 2000 ANSI 2000:1 body. Reach in with two fingers and disconnect the BENQ MP610 6.4 LBS DLP PROJECTOR SVGA 2000 ANSI 2000:1 bulb. Reverse these steps to re-assemble your BENQ MP610 6.4 LBS DLP PROJECTOR SVGA 2000 ANSI 2000:1. This concludes the BENQ MP610 6.4 LBS DLP PROJECTOR SVGA 2000 ANSI 2000:1 review - be sure to read the entire BENQ MP610 6.4 LBS DLP PROJECTOR SVGA 2000 ANSI 2000:1 manual.