Make certain you have read the 3M Company EP8755AS Short Throw LES for MP8755/MP8745/MP8755/MP8770 manual thoroughly before attempting the 3M Company EP8755AS Short Throw LES for MP8755/MP8745/MP8755/MP8770 bulb replacement on your 3M Company EP8755AS Short Throw LES for MP8755/MP8745/MP8755/MP8770. Without touching the surface of the 3M Company EP8755AS Short Throw LES for MP8755/MP8745/MP8755/MP8770 lens, remove the lens tube and set it aside. Write down the number from inside the tube's inner lip for the purpose of make, model or serial number for any future need to buy 3M Company EP8755AS Short Throw LES for MP8755/MP8745/MP8755/MP8770 replacement parts. Your bulb should be sitting just beyond the opening of the 3M Company EP8755AS Short Throw LES for MP8755/MP8745/MP8755/MP8770 body. Reach in with two fingers and disconnect the 3M Company EP8755AS Short Throw LES for MP8755/MP8745/MP8755/MP8770 bulb. Reverse these steps to re-assemble your 3M Company EP8755AS Short Throw LES for MP8755/MP8745/MP8755/MP8770. This concludes the 3M Company EP8755AS Short Throw LES for MP8755/MP8745/MP8755/MP8770 review - be sure to read the entire 3M Company EP8755AS Short Throw LES for MP8755/MP8745/MP8755/MP8770 manual.