Make certain you have read the Hitachi CP-S318 SVGA 1400 ANSI LCD Projector manual thoroughly before attempting the Hitachi CP-S318 SVGA 1400 ANSI LCD Projector bulb replacement on your Hitachi CP-S318 SVGA 1400 ANSI LCD Projector. Without touching the surface of the Hitachi CP-S318 SVGA 1400 ANSI LCD Projector lens, remove the lens tube and set it aside. Write down the number from inside the tube's inner lip for the purpose of make, model or serial number for any future need to buy Hitachi CP-S318 SVGA 1400 ANSI LCD Projector replacement parts. Your bulb should be sitting just beyond the opening of the Hitachi CP-S318 SVGA 1400 ANSI LCD Projector body. Reach in with two fingers and disconnect the Hitachi CP-S318 SVGA 1400 ANSI LCD Projector bulb. Reverse these steps to re-assemble your Hitachi CP-S318 SVGA 1400 ANSI LCD Projector. This concludes the Hitachi CP-S318 SVGA 1400 ANSI LCD Projector review - be sure to read the entire Hitachi CP-S318 SVGA 1400 ANSI LCD Projector manual.